SupaDTF works on almost any fabric including cotton, polyester, blends, and performance fabrics. The lower-temperature adhesive reduces the chance of heat marks on sensitive materials like polyester.

SupaDTF heat transfers are not designed for fabrics with waterproof coatings or anything with dye that could migrate, like patterned polyester or dark denim. If you’re not sure if your fabric will bleed or not, it’s a good idea to use our Blocker transfer just to be safe (or Softshell Blocker if you’re printing on softshell fabric). These will block any dye migration.

SupaDTF uses hot peel application for fastest results. Press at the recommended temperature and time for your specific fabric type. The adhesive provides excellent, consistent application across all fabric types.

Find step by step instructions here

There's no minimum – you can order just one transfer if that's all you need. SupaDTF gives you maximum flexibility for short runs, samples, and print-on-demand.

SupaDTF does not currently offer PMS colour matching. For projects requiring precise PMS colour matching, we recommend our Hybrid transfer products which support accurate PMS colour reproduction.

SupaDTF is available in sheets from 50mm x 50mm up to 300mm x 560mm, or in rolls (SupaDTF Supagang) for custom gang sheet printing.

Find all of our templates here

Yes! SupaDTF supports halftones and fadeouts, giving you full gradient capability and photographic detail.

Our advanced 8-color digital system delivers brighter whites and more vibrant colors than standard DTF. The lower temperature adhesive and superior color accuracy mean better results with less risk of heat marks or color variations.

Our 8-colour system provides excellent colour accuracy for brand matching. If you need to match a specific previous order exactly, add "Repeat colours" in the order comments and our team will reach out to ensure we nail the match.

They’re independently proven to last 80+ washes before they show any signs of fading or cracking. For most people, that’s a few years – usually longer than the garments they’re printed on!

Like all of our transfers, the SupaDTF is a professional-grade heat transfer that can be used with an air-operated or manual heat press. However, it is NOT designed to be pressed with a domestic iron, or the Cricut Easy Press or any other presses without adequate pressure settings.

Shop our presses here

You bet. Like all of our transfers, they’re made from water-based inks, not plastic-based, and are OEKO-Tex certified, so you know they’re not harmful to you or the planet.

Yes, but only if you’re printing where the design won’t go over seams (e.g. on a five panel cap). If you want to print over seams, use our Headwear transfers. These are designed specifically for that, and will print beautifully over seams and even mesh without cracking.

The SupaDTF and Wearable heat transfers have a lot of similar uses. The decision really comes down to quantity. SupaDTF is more economical for less than 20 pieces. For anything more than that, it’s more economical to use the Wearable.

There will be a slight colour difference between SupaDTF and other transfers because they’re made using different printing processes. However, unless your garments need to match exactly because they’ll be seen side by side, this shouldn’t be cause for concern.

After you’ve placed your order, your transfers will leave our factory within 1-2 business days. Delivery times will vary depending on your location.

No, we don’t charge any extra fees except shipping, which is calculated before checkout.

Yes! Check out SupaDTF Supagang for roll options and custom gang sheet layouts.