SupastickUV: Waterproof UV DTF Stickers for Tumblers, Phone Cases and Hard Surfaces
Custom branded merchandise doesn't have to mean a minimum order of 100, a three-week wait, or a printer taking up half your workspace. SupastickUV changes what's possible: for decorators who want to offer more, and for anyone who just wants their logo or artwork on a tumbler, a phone case, or a helmet without any of the usual fuss.
No heat press. No printer. No minimum order. Just your design, pre-cut and ready to apply.
What are UV DTF stickers?
UV DTF (UV Direct to Film) stickers are a type of premium transfer sticker that bonds directly to hard surfaces, leaving the printed artwork with a more painted-on look than a traditional sticker. They use a harder, more durable ink layer than standard vinyl or paper stickers, which is why they hold up better against fading, scratching, and everyday wear.
SupastickUV has a high-gloss finish that gives it a raised, polished look with no visible background or border around the design. It looks like it belongs on the product, not stuck to it.
How to brand tumblers and drink bottles
If there's one surface UV stickers were made for, it's a tumbler. Stainless steel, powder-coated, glass, and hard plastic drink bottles all provide exactly the kind of smooth, non-porous surface SupastickUV bonds to best, and the result looks sharp enough to sell.
SupastickUV is fully waterproof, so your branded tumblers handle daily use, moisture, and the inside of a gym bag without the sticker fading or peeling. Hand washing rather than the dishwasher will get you the longest life. And one tip that makes a bigger difference than anything else: wipe the surface with a 50/50 mix of rubbing alcohol and water before you apply. That one step is the difference between a sticker that lasts years and one that starts lifting at the edges.
What else can you brand with UV DTF stickers?
If it's smooth and hard, chances are SupastickUV will stick to it. Here's where UV DTF stickers work best:
- Phone cases: smooth hard-shell cases work well. If the case is soft, heavily textured or porous, give it a miss.
- Laptop cases: hard-shell laptop cases, tablet covers, and power banks take UV stickers cleanly. Great for personal branding, gifts, or corporate asset labelling.
- Helmets and hard hats: the smooth panels on bike helmets and hard hats are ideal. Avoid vents, rivets, or anywhere the surface changes texture.
- Coolers and outdoor gear: powder-coated and hard plastic coolers, flasks, and outdoor kit handle UV stickers well both indoors and out.
- Coffee mugs and glassware: smooth ceramic mugs and glassware work well. Hand wash only, and keep the sticker away from the rim or any area that comes into contact with food or lips.
One rule covers all of it: smooth, hard, non-porous surfaces are the sweet spot for UV DTF stickers. Heavily textured and porous surfaces aren't suitable.
UV DTF stickers with no minimum order
This is the part most people can't quite believe. There's no minimum. Order one sticker to test a design on your own tumbler, or a hundred for a client run. You choose exactly what you need and nothing more.
Seven sizes are available from XS (40 × 40 mm) right up to A3 (420 × 297 mm), so whether you're branding a small phone case or a large helmet graphic, there's a size that fits. Need variety? Gang multiple designs onto one sheet. SupastickUV gang sheets come in Mini, ½m, and 1m sizes: the most cost-effective way to offer multiple designs without holding stock.
For decorators: add stickers to your catalogue without adding equipment
Every decorator turns down jobs they shouldn't have to. A client wants branded tumblers, a business wants logo stickers for their corporate giveaways, a school wants personalised water bottles for a fundraiser. Without the right product, those jobs walk out the door.
SupastickUV brings them back in. Add UV DTF stickers to your offering without buying a single piece of new equipment. No machinery, no learning curve, no upfront stock. Order what you need, when you need it, and hand it over with the included squeegee applicator.
With no minimum order, there's no risk in trialling it: take on one job, see how your clients respond, and scale from there.
How to apply SupastickUV
Every order arrives pre-cut with a squeegee applicator included. Four steps and you're done:
- Prep your surface: wipe clean with a 50/50 mix of rubbing alcohol and water and let it dry fully. Don't skip this: it's the most important step for long-lasting adhesion.
- Prep your sticker: place your sticker face down. Before peeling anything, run the squeegee firmly back and forth across the whole design 2–4 times. This bonds the design to the carrier sheet so it lifts cleanly when you peel. Skipping this step is the most common reason parts of a design don't transfer properly.
- Peel: gently peel the two sheets apart, checking the full design has lifted onto the carrier sheet. If anything hasn't lifted, re-press and try from a different angle.
- Place and press: position your design on the surface and press firmly with the applicator. Then peel the carrier sheet back slowly, folding it back over itself at 180 degrees rather than lifting it upward. Take your time: peeling too quickly or at the wrong angle can cause the sticker to tear. If you feel any resistance, stop, press down again, and continue peeling slowly.
SupastickUV uses a permanent adhesive, so take your time lining up the design before you commit. It's not designed to be repositioned or reused.
Matching a brand colour
Need to hit a specific brand colour? Add a note at checkout and the team will follow up.
