Designed for those hard-to-press tech fabrics, Lo Melt lets you expand your decoration to garments you previously thought were too difficult. With its low temperature, you can forget about the risk of heat marks and print with confidence.
Our Lo Melt heat transfers include our famous screen printed layer of water-based white ink.
Lo Melt is also available with a Blocker. This is designed for fabrics that are sublimated or have heavy patterns, and stops any migration in its tracks.
If there’s an issue with your artwork, we’ll take care of it. Every order is shipped within 1-2 working days, and if you’re not 100% happy, we’ll make it right. (It’s why we win awards for our customer service.)
No, but it will stick to water-resistant fabrics. For fabrics that are 100% waterproof, we recommend the Promotional heat transfer.
Yes – it comes with a blocker version, which should be used for fabrics you expect to bleed, like sublimated polyester and heavily patterned fabrics.
Only if there are no seams where you’re pressing the transfer. Lo Melt will crack on seams, so if it’s a six panel cap or there are seams, use the Headwear transfer.
After you’ve placed your order, your transfers will leave our factory within 1-2 business days. Delivery times will vary depending on your location.
Nope, just the cost of the transfers and shipping (which is calculated at checkout).
The same way you order our current products - just select LM (Lo Melt) or LB (Low Melt Blocker).
Lo Melt means a lower temperature, typically 260-270F. Press for 12-15 seconds at 40PSI/firm. Click here for pressing instructions.
Yes, the minimum order is 10 identical single-image transfers or 10 identical gang sheets.
Yes - it is the same ink technology as our other products, which all use water-based inks without hidden plastics, certified by OEKO-TEK.
